Carrier Access none manual No command, No shutdown

Configuration - LCC Controller Mode

history

Use the history command to display commands that have been entered in this session. This command can be entered in any configuration mode.

Syntax: (config-cont-lcc-{n})# history

Example: (config-cont-lcc-1)# history

history

description Test-LCC no shutdown history

Supported Platforms: MSR

no command

no shutdown

Use the Controller LCC no shutdown command to set the LCC up (in-service). To set the LCC down (Out-of-Service), see the shutdown command on page 5-6.

Syntax: (config-cont-lcc-{n})# no shutdown

Example: (config-cont-lcc-1)# no shutdown

Supported Platforms: MSR

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 5-5