Carrier Access none manual Syntax config-pptps# start-address start-address, Start-ip-address

Configuration - PPTPS Mode

shutdown

Use the PPTP Server shutdown command to set the admin state of the server down (out-of-service). To set the admin state up (in-service), see no shutdown command on page 18-6.

Syntax: (config-pptps)# shutdown

Example: (config-pptps)# shutdown

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

start-address

Use the PPTP Server start-addresscommand to set the PPTP remote host IP address range start.

Syntax: (config-pptps)# start-address start-address

Field	Definition
start-ip-address	Enter the start IP address of the range.

Example: (config-pptps)# start-address 192.168.1.1

Supported Platforms: Adit 3104, Adit 3500, MSR

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 18-7