Carrier Access none manual Log system buffer, Log system notify, Example config# log system buffer

Global Configuration Mode

Global Configuration Commands

log system buffer

Use the log system buffer command to set the buffer size allowed for the system log buffer.

Syntax: (config)# log system buffer kilobytes

Field	Definition
kilobytes	Set the size of the system log buffer. Range is 1 - 256 KB. Default is
	16KB.

Example: (config)# log system buffer 24

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

log system notify

Use the log system notify command to set the remote system notify level.

Syntax: (config)# log system notify {errorinfoip-address address

nonewarn}

Field	Definition
error	Notify for error level.
info	Notify for information level.
ip-address address	Enter IP address of remote system to notify.
none	No notification.
warn	Notify for warning level.

Example: (config)# log system notify error

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-31