Carrier Access none manual No dial-peer voice voip, No dmz-host, No dynamic-dns

Global Configuration Mode

Global Configuration Commands

no dial-peer voice voip

Use the no dial-peer voice voip command denies access to the Dial Peer Voice VoIP configuration commands. To allow access, see dial-peer voice command on page 4-11.

Syntax: (config)# no dial-peer voice voip tag

Field

tag

Definition

Enter the tag number to denies access. Range is 1-30.

Example: (config)# no dial-peer voice voip 1

Supported Platforms: Adit 3104, Adit 3500, MSR

no dmz-host

Use the no dmz-hostcommand to remove a DMZ host. To add a DMZ hose, see dmz-hostcommand on page 4-12.

Syntax: (config)# no dmz-host address

Field	Definition
address	The IP address of the DMZ host.

Example: (config)# no dmz-host 10.10.200.1

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

no dynamic-dns

Use the no dynamic-dnscommands to disable DNS Dynamic entries. To enable DNS Dynamic entries, see dynamic-dnscommand on page 4-14.

Syntax: (config)# no dynamic-dns {backup-mxinterfacemail-exchanger offlinewildcard}

Field	Definition
backup-mx	Disable DNS Dynamic Backup MX.
interface	Specify DNS Dynamic connection to update.
mail-exchanger	Remove mail exchanger.
offline	Disable DNS Dynamic offline.
wildcard	Disable DNS Dynamic wildcard.

Example: (config)# no dynamic-dns backup-mx

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-39