Carrier Access none manual Digit-map global, Long-timeout, Pattern, Short-timeout

Configuration - Voice Port Mode

digit-map (global)

Use the Voice Port digit-mapglobal command to configure the Digit Map on a global level. To disable digit map, see no digit-map (global) command on page 22-5.

Syntax: (config-vport)# digit-map mode {long-timeout seconds pattern

number pattern short-timeoutseconds}

Field	Definition
long-timeout	Range is 4-60 seconds, with a default of 16.
seconds
pattern	number - Enter pattern number to modify. Range is 1-30.
	See show digit-mapcommand on page 3-37,to display the current list
	of Digit Map numbers.
	pattern - Enter the new pattern, with a maximum of 30 characters.
short-timeout	Range is 1-10 seconds, with a default of 4.
seconds

Example: (config-vport)# digit-map mode long-timeout 20

Supported Platforms: Adit 3104, Adit 3500, MSR

22-2 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI