Carrier Access none manual Lifetime, Local-subnet, Single ip, Subnet ip

Configuration - IPSec Mode

lifetime

Use the IPSec mode lifetime command to set the connection lifetime.

Syntax: (config-ipsec {n})# lifetime time seconds

Field	Definition
seconds	Set the connection lifetime. Range 1-86400 seconds, with a default of
	86400.

Example: (config-ipsec-1)# lifetime time 70000

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

local-subnet

Use the IPSec mode local-subnetcommand to set the local subnet IP address.

Syntax: (config-ipsec {n})# local-subnet {nonerange {start-address address end-address address}single ip addresssubnet ip address}

Field	Definition
none	No IP address.
range	Enter an IP address range.
	start-address- Enter the start IP address of the range.
	end-address- Enter the end IP address of the range.
single ip	Enter a single IP address.
subnet ip	Enter a subnet IP address.

Example: (config-ipsec-1)# local-subnet range start-address 192.168.1.1 end-address 192.168.1.10

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 14-9