Carrier Access none manual No registration line enable, No registration line logging

Configuration - Voice Port Trunk Mode

no registration line

Use the Voice Port Trunk no registration line command remove a registration line. To add a registration line, see registration line enable command on page 24-13.

Syntax: (config-vport-trk-{n})# no registration line number

Field	Definition
number	Enter line number to Remove. Range 1 -300. Note: This line must be
	enabled for this command to be accepted.

Example: (config-vport-trk-1)# no registration line 1

Supported Platforms: Adit 3500, MSR

no registration line enable

Use the Voice Port Trunk no registration line enable command to disable a registration line. To enable line registration, see registration line enable command on page 24-13.

Syntax: (config-vport-trk-{n})# no registration line number enable

Field	Definition
number	Enter line number to disable. Range 1 -300. Note: This line must be
	enabled for this command to be accepted.

Example: (config-vport-trk-1)# no registration line 1 enable

Supported Platforms: Adit 3500, MSR

no registration line logging

Use the Voice Port Trunk no registration line logging command disable line logging on a PBX line. To enable logging, see registration line logging command on page 24-14.

Syntax: (config-vport-trk-{n})# no registration line number logging

Field	Definition
number	Enter line number to disable. Range 1 -300.

Example: (config-vport-trk-1)# no registration line 1 logging

Supported Platforms: Adit 3500, MSR

24-10 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI