Carrier Access none manual Interface multilink, Interface serial, Adit 3200, Adit 3500 Range =

Global Configuration Mode

Global Configuration Commands

interface multilink

Use the interface multilink command to allow access to the MLPPP configuration commands. See Chapter 12, Configuration - Multilink Interface Mode for commands in this mode. To delete a Multilink interface, see no interface multilink command on page 4-42.

Syntax: (config)# interface multilink group-number

Field	Definition
group-number	Enter multilink group number.
	Adit 3104, Adit 3200, Adit 3500: Value must be 1.
	MSR: Range = 1-8.

Example: (config)# interface multilink 1

(config-int-mlink-1)#

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

interface serial

Use the interface serial command to allow access to the serial interface configuration commands. See Chapter 13, Configuration - Serial Interface Mode for commands in this mode. To delete a serial interface, see no interface serial command on page 4-42.

Syntax: (config)# interface serial port

Field

port

Definition

Adit 3104: Value must be 1.

Adit 3200, Adit 3500: Range = 1-4.

MSR: Range = 1-8.

Example: (config)# interface serial 1

(config-int-ser-1)#

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

4-20 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI