Carrier Access none manual No comfort-noise, No echo-cancel, No per-line-logging

Configuration - Voice Port FXS Mode

no commands

no comfort-noise

Use the Voice Port FXS no comfort-noisecommand to disable comfort noise. To enable remote access, see comfort-noisecommand on page 23-2.

Syntax: (config-vport-fxs-{n})# no comfort-noise

Example: (config-vport-fxs-1)# no comfort-noise

Supported Platforms: Adit 3104, Adit 3500, MSR

no echo-cancel

Use the Voice Port FXS no echo-cancelcommand disable echo cancellation on this port. To enable echo cancellation, see echo-cancelcommand on page 23-4.

Syntax: (config-vport-fxs-{n})# no echo-cancel

Example: (config-vport-fxs-1)# no echo-cancel

Supported Platforms: Adit 3104, Adit 3500, MSR

no per-line-logging

Use the Voice Port FXS no per-line-loggingcommand disable the logging per line feature. To enable logging, see per-line-loggingcommand on page 23-7.

Syntax: (config-vport-fxs-{n})# no per-line-logging

Example: (config-vport-fxs-1)# no per-line-logging

Supported Platforms: Adit 3104, Adit 3500, MSR

no shutdown

Use the Voice Port FXS no shutdown command to set this voice port up (In-Service). To set this port down (Out-of-Service), see shutdown command on page 23-7.

Syntax: (config-vport-fxs-{n})# no shutdown

Example: (config-vport-fxs-1)# no shutdown

Supported Platforms: Adit 3104, Adit 3500, MSR

23-6 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI