Carrier Access none Dial-peer voice pots fxs, Dial-peer voice pots trunk, Adit 3500 Range =

Global Configuration Mode

Global Configuration Commands

dial-peer voice

dial-peer voice pots fxs

Use the dial-peer voice pots fxs command to allow access to the Dial Peer Voice FXS configuration commands. See Chapter 8, Configuration - Dial Peer FXS Mode for commands in this mode. For the no counterpart of this command see no dial-peer voice pots fxs command on page 4-38.

Syntax: (config)# dial-peer voice pots fxs port

Field

port

Definition

Selects the FXS port to configure. Adit 3104: Range is 1-24.

Adit 3500: Range is 1-4.

MSR: Range is 1-48.

Example: (config)# dial-peer voice pots fxs 1 (config-dpeer-fxs)#

Supported Platforms: Adit 3104, Adit 3500, MSR

dial-peer voice pots trunk

Use the dial-peer voice pots trunk command to allow access to the Dial Peer Voice Trunk configuration commands. See Chapter 9, Configuration - Dial Peer Trunk Mode for commands in this mode. For the no counterpart of this command see no dial-peer voice pots trunk command on page 4-38.Note: This command is not supported on the Adit 3104.

Syntax: (config)# dial-peer voice pots trunk port dest-port

Field	Definition
port	Select the trunk port to configure.
	Adit 3500: Range = 1-4
	MSR: Value must be 1.
dest-port	Set destination port. Range is 1-30.

Example: (config)# dial-peer voice pots trunk 2 1 (config-dpeer-trk)#

Supported Platforms: Adit 3500, MSR

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-11