Carrier Access none manual Rtp-base-port

Configuration - Voice Service SIP Mode

registration

Use the Voice Service SIP registration command to configure the SIP registration, which allows trunk registration for each user of a PBX. To disable ignore negotiated registration timeout, see no registration ignore-negotiatedcommand on page 25-10.

Syntax: (config-voice-serv-sip)# registration {expire seconds failed-time secondsignore-negotiated enablerate value retry-timeout millisecondstries valuewindow-size value}

Field	Definition
expire seconds	Sets the registration expire timeout. Range is 60 - 86400 seconds, with
	a default of 3600.
failed-time seconds	Sets the failed registration timer. Range is 30 - 86400 seconds, with a
	default of 60.
ignore-negotiated	Enable ignore negotiated expiration timeout.
enable
rate value	Sets the number of registrations per minute. Range is 1-300, with a
	default of 60.
retry-timeout	Sets the SIP retry timeout (SIP T1). Range is 200 - 5000 milliseconds,
milliseconds	with a default of 500.
tries value	Range is 1 - 10 times, with a default of 5.
window-size value	Range is 1 - 304 , with a default of 10.

Example: (config-voice-serv-sip)# registration expire 5000

Supported Platforms: Adit 3104, Adit 3500, MSR

rtp-base-port

Use the Voice Service SIP rtp-base-portcommand to configure the RTP base port. Choice of port to be advertised during the media-negotiation phase of call setup and used during the call to send and receive RTP.

Syntax: (config-voice-serv-sip)# rtp-base-port number

Field	Definition
number	Range 1026 - 65000, with a default of 28000.

Example: (config-voice-serv-sip)# rtp-base-port 2500

Supported Platforms: Adit 3104, Adit 3500, MSR

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 25-17