Carrier Access none manual No commands, No access-control

Global Configuration Mode

Global Configuration Commands

no commands

no access

Use the access command to disable remote access via LAN or WAN. To enable remote access, see access command on page 4-4.

Syntax: (config)# no access {lanwan}

Field

lan

wan

Definition

Disable access to the unit via the LAN.

Disable access to the unit via the WAN.

Example: (config)# no access lan

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

no access-control

Use the no access-controlcommand to remove an access rule for the system. To add an access rule, see access-controlcommand on page 4-4.

Syntax: (config)# no access-control name

Field

name

Definition

Enter a current Access Control (Scheduler Rule).

Example: (config)# no access-control AccessControl1

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

4-36 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI