Carrier Access none Upgrade, Syntax # traceroute Syntax # traceroute addresshostnamestop, Check

Privileged Mode

traceroute

Use the traceroute command to trace a route to a remote host.

Syntax: # traceroute

Syntax: # traceroute {addresshostnamestop}

Field	Definition
address	IP address of the remote host.
hostname	Host name of the remote host.
stop	Stop the traceroute process.

Example: Adit 3500# traceroute to 192.168.1.200

(192.168.1.200), 10 hops max

1 192.168.1.200 (192.168.1.200) 10.500 ms 1.013 ms 0.926 ms

Traceroute: Destination Reached

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

upgrade

Use the upgrade command to upgrade the system software. Note: This requires the TFTP software to be running in the background.

Syntax: # upgrade ip-address address file filename [check]

Field	Definition
address	IP address of the TFTP server with the software upgrade file.
filename	Name of the software file to load on the system, this is a .rmt file.
check	Check only. Verify that the file is a software image file. Do not store
	the file as the software image

Example: adit 3500# upgrade ip-address 192.168.1.1 file adit3500_1_0.rmt

WARNING: Upgrade starting. Do NOT issue new commands until done

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 3-67