Carrier Access none manual Codec preference, Destination-pattern, 123, G711alaw

Configuration - Dial Peer FXS Mode

codec preference

Use the Dial Peer codec preference command to set the codec preferences used to establish the codec list offered during media negotiation. To delete a codec, see no codec preference command on page 8-9.

Syntax: (config-dpeer-fxs)# codec preference {123} {g711alaw g711ulawg729}

Field	Definition
123	Enter the preference number. #1 being the first preference.
g711alaw	Set the codec preference to G.711 A-law.
g711ulaw	Set the codec preference to G.711 U-law.
g729	Set the codec preference to G.729.
	Note: This codec is not supported by the Adit 3500 or MSR for FXS.

Example: (config-dpeer-fxs)# codec preference 1 g711alaw

Supported Platforms: Adit 3104, Adit 3500, MSR

destination-pattern

Use the Dial Peer destination-patterncommand to define the full telephone number to be used for a dial peer.

Syntax: (config-dpeer-fxs)# destination-pattern number

Field	Definition
number	Enter the phone number to be used for a dial peer.

Example: (config-dpeer-fxs)# destination-pattern 5551212

Supported Platforms: Adit 3104, Adit 3500, MSR

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 8-3