Carrier Access none manual Log pri, Log security buffer

Global Configuration Mode

Global Configuration Commands

log pri

Use the log pri command to configure PRI logging.

Syntax: (config)# log pri {buffer-fill {01}buffer-size kilobytes display numberenable}

Field	Definition
buffer-fill {01}	Define the method of loading the buffer.
	0 = Circular Buffer - the buffer will store a continuous stream of data
	by starting again at the beginning of the buffer after reaching the end.
	Default.
	1 = Fill Until Full - the buffer will fill until it is full. The user will
	have to clear the log manually.
buffer-size kilobytes	Configure the PRI log size. Range is 1-250 KB, with a default of 100
	KB.
display number	Defines the number of lines per message. 0 = full
enable	Enable PRI logging.

Example: (config)# log pri buffer-fill 0

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

log security buffer

Use the log security buffer command to set the buffer size allowed for the security log buffer.

Syntax: (config)# log security buffer kilobytes

Field	Definition
kilobytes	Set the size of the Security log buffer. Range is 1-256 KB. Default is
	16KB.

Example: (config)# log security buffer 24

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-29