Carrier Access none manual Adit 3000 Rel .6 and MSR Card Rel 2.0 CLI 13-5

Configuration - Serial Interface Mode

firewall

Use the Serial Interface firewall command to enable the configured firewall. To delete a preference, see no firewall command on page 13-14.

Syntax: (config-int-ser-{n})# firewall enable

Example: (config-int-ser-1)# firewall enable

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

history

Use the history command to display commands that have been entered in this session. This command can be entered in any configuration mode.

Syntax: (config-int-ser-{n})# history

Example: (config-int-ser-1)# history

encapsulation ppp metric

ppp on-demand

pppencryption 128-bit ppp restart-timer 10

ppp time-btwn-reconnect 40 ip rip enable

history

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 13-5