Sanyo DSR-3000, Digital Video Recorder instruction manual Specifications

SPECIFICATIONS

Hard disk capacity	: 80 GB or 160 GB
Television System	: NTSC color signal standard
Picture Resolution	: 720 x 240 (Field), 720 x 480 (Frame)
Compression	: M-JPEG
Picture Quality	: 5 Levels (Basic, Normal, Enhanced, Fine, Super Fine)
Recording Type	: Frame or Field Recording
Recording Speed	: 27 Levels.
Recording Area	: Normal Recording Area, Alarm Recording Area, Archive Area
Playback	: Playback, Still, Search
Zoom	: 2 Times Zoom Function
Search Mode
• Time/Date Search	: Search by time and date
• Alarm Search	: Search by alarm event list
• Alarm Thumbnail Search	: Search by alarm event thumbnails
• Archive Area Search	: Search Archive Area with event list
• Smart Motion Search	: Search by specifying a motion sensor
Menu Language	: English/French/Spanish
Clock settings	: Year/month/day/hours/minutes/seconds
Video input terminal	: 1.0 Vp-p/75 Ω, unbalanced, BNC x 1
S- video input terminal	: Separate YC signals, DIN connector (S terminal) x 1
	Y signal: 1.0 Vp-p/75 Ω, unbalanced, synchronous; C signal: 0.286 Vp-p/75 Ω, unbalanced
Digital input terminal	: RJ-45 x1
Digital SUB input terminal	: RJ-45 x1
Audio input terminal	: –8dBs, 27 kΩ unbalanced, RCA pin jack x 1
Microphone input terminal	: –60dBs 10kΩ unbalanced, 3.5mm mini jack
Video output terminal	: 1.0 Vp-p/75 Ω, unbalanced, BNC x 1
S- video output terminal	: Separate YC signals, DIN connector (S terminal) x 1
	Y signal: 1.0 Vp-p/75 Ω, unbalanced, synchronous; C signal: 0.286 Vp-p/75 Ω, unbalanced
Loop out terminal	: 1.0 Vp-p/75 Ω, unbalanced, BNC x 1
S- video loop out terminal	: Separate YC signals, DIN connector (S terminal) x 1
	Y signal: 1.0 Vp-p/75 Ω, unbalanced, synchronous; C signal: 0.286 Vp-p/75 Ω, unbalanced
Digital output terminal	: RJ-45 x1
Digital SUB output terminal	: RJ-45 x1
Audio output terminal	: –8dBs, 600 Ω unbalanced, RCA pin jack x 1
Compact Flash Slot	: Compact Flash Type 2 (Front)
PC Card Slot	: PCMCIA Type 2 (Rear) for SCSI or Ethernet card
RS-232C terminal	: D- SUB 9pin (for PC)
Control connectors
• RS-485 terminal	: Push lock (3 terminals: A, B, C (GND))
• Remote Control terminal	: 1 input for resister alley switch
• Alarm in terminal	: 1 input (Normal Open Low level active)
• Alarm out terminal	: 1 output (Normal 5V Low level active)
• Alarm reset terminal	: 1 input (Normal Open Low level active)
• SW out terminal	: 1 output (Normal 5V Low level active)
• NON Rec out terminal	: 1 output (Normal 5V Low level active)
• Clock Adjust in terminal	: 1 input (Normal Open Low level active)
• Clock Adjust out terminal	: 1 output (Normal 5V Low level active)
• Warning out terminal	: 1 output (Normal 5V Low level active)
• Disk Full out terminal	: 1 output (Normal 5V Low level active)
• Alarm Full out terminal	: 1 output (Normal 5V Low level active)
Power	: AC 120V, 60 Hz
Power consumption	: 26 W 400 mA
Operating environment	: Temperature: 5°C to 40°C, Humidity: 10 to 80%
Dimensions	: 420 (W) x 86 (H) x 364.5 (D) mm
Weight	: Approx. 5.5 kg

Products are subject to change in design and specifications without notice and without incurring any obligation.

76 English