Sanyo Digital Video Recorder RS-232C/RS-485 SET Setting, RS-485 Selection, Address item 0 to

RS-232C/RS-485 SET SETTING

RS-485 Selection

Connect the RS-485 control terminals (A and B) of the digital video recorder in series with other devices such as a controller, multiplexer or another digital video recorder. (See page 7.)

1 Turn the shuttle dial clockwise, use the jog dial to select RS-485, and then turn the shuttle dial clockwise.

The cursor moves to DATA SPEED.

The STATUS INFO, ALARM INFO and ADDRESS settings can be changed.

<RS-232C/RS-485			SET>
CONTROL	:	RS-485
DATA SPEED	:	19200
STATUS INFO	:	ON
ALARM INFO	:	ON
ADDRESS	:	000

2 Turn the shuttle dial clockwise, use the jog dial to select a communication speed (example: “ 19200” ), and then turn the shuttle dial clockwise.

•Communication speeds: 2400, 4800, 9600 and 19200 The cursor moves to STATUS INFO.

<RS-232C/RS-485			SET>
CONTROL	:	RS-485
DATA SPEED	:	19200
STATUS INFO	:	ON
ALARM INFO	:	ON
ADDRESS	:	000

3 Turn the shuttle dial clockwise, use the jog dial to select status information (example: “ ON” ), and then turn the shuttle dial clockwise.

•ON: Status information will be transmitted. The cursor moves to ALARM INFO.

4 Turn the shuttle dial clockwise, use the jog dial to select alarm information (example: “ ON” ), and then turn the shuttle dial clockwise.

•ON: Alarm information will be transmitted. The cursor moves to ADDRESS.

5 Turn the shuttle dial clockwise, use the jog dial to select an address (example: “ 37” ), and then turn the shuttle dial clockwise.

This completes the setting and the cursor moves to CONTROL.

Note: The range of valid addresses for this unit is from 0 to 127. If

more than one digital video recorder is connected, be careful that same addresses are not repeated.

• Address item: 0 to 127

<RS-232C/RS-485 SET>

CONTROL	:	RS-485
DATA SPEED	:	19200
STATUS INFO	:	ON
ALARM INFO	:	ON
ADDRESS	:	000
<RS-232C/RS-485 SET>
CONTROL	:	RS-485
DATA SPEED	:	19200
STATUS INFO	:	ON
ALARM INFO	:	ON
ADDRESS	:	37

6 Press the EXIT/OSD button.

The display returns to the normal screen.

EXIT/OSD

English 61