Sanyo Digital Video Recorder Recording Images in the Alarm Recording Area, Alarm recording

RECORDING IMAGES IN THE ALARM RECORDING AREA

Alarm recording

Alarm images are recorded

1

MENU

2

ALARM

1Setting the time

Press the MENU button to display the LANGUAGE/CLOCK SET menu, and set the date and time. After the setting has been made, press the EXIT/OSD button, the date and time appear in the operating display. (See page 42.)

2Set alarm recording.

•Press the MENU button to display the ALARM REC MODE SET menu from the MAIN MENU screen. Then change the ALARM RECORDING setting to the desired alarm recording setting (MODE1, 2, 3 or 4) and change the ALARM TRIGGER setting. (See page 54 ~ 56.)

•Press the MENU button, to display the BUZZER SET menu from the MAIN MENU 2 screen, and change the ALARM setting to “ON”. (See page 62.)

•Press the EXIT/OSD button to return to the normal screen.

Suspicious person detection

When an alarm occurs, “ALARM” appears in the operating display, the ALARM indicator flashes and alarm recording (a symbol) starts. Alarm images are recorded in the alarm recording area. Furthermore, the number of alarms in the operating display is increased by one each time an alarm occurs.

<MAIN MENU 1>

	1.LANGUAGE/CLOCK SET				->
	2.VIDEO INPUT SET				->
	3.RECORDING AREA SET				->
	4.RECORDING CONDITIONS SET ->
		<LANGUAGE/LANGUE/IDIOMA>
		ENGLISH
		<CLOCK SET>
		01-01-2001 MON		00:00:00
		<ALARM REC		MODE SET>
PICTURE QUALITY			:	ENHANCED
FRAME/FIELD RECORDING			:	FIELD
AUDIO RECORDING			:	OFF
ALARM RECORDING			:	MODE1
REC CYCLE : 0.10SEC.				DURATION: 1SEC
PRE-ALARM RECORDING			:	¤¤¤

REC CYCLE	: ¤¤¤	SEC.	DURATION: ¤¤¤
=> (46400	ALARMS	CAN BE RECORDED)
ALARM TRIGGER		:	ALARM
MOTION SENSOR			->

10-05-01 ALARM 0001 18:10:2510SEC

Note: Normal recording and timer recording stop when an alarm occurs during normal recording or timer recording.

Ending alarm recording

3	Recording ends after the end of the alarm duration period (default setting: 1 sec).
	The “a” and ALARM displays stop flashing and recording stops.
	Note: When the remaining area in the alarm recording area reaches 1%, the
	ALARM FULL indicator on the front panel flashes. If recording is continued
	under these conditions, the recording area is filled and the recording
	stops. In the RECORDING AREA SET settings, carry out the AREA FULL
	RESET operation for the alarm recording area.
	Overwriting will be canceled and recording will be possible from the
	beginning again. (See page 48.)

The number of alarms is counted.

POWER FULL ALARM FULL LOC

English 17