SEARCHING FOR RECORDED IMAGES
Motion detection search
When a motion sensor is set for images recorded in the normal recording area (normal recording and timer recording images) or for images recorded in the alarm recording area of the hard disk, you can search for images that have changed because of the entry of a suspicious person, for instance, and play back only those images.
Note:
•
•
If carrying out motion detection searches of multiplexer images, change the setting for MULTIPLEXER in the VIDEO INPUT SET menu to something other than “NO USE”.
If the digital video recorder is connected to a Sanyo multiplexer that allows decoding of channel information (camera numbers), channels can be specified so that only images from those channels are searched for. If any other type of multiplexer is connected, this setting is not possible.
1
SEARCH
FRAME/FIELD
Press the SEARCH FRAME/FIELD button during recording or when the digital video recorder is stopped.
The SEARCH screen appears.
<SEARCH>
ALARM SEARCH | |
ALARM THUMBNAIL SEARCH | |
TIME DATE SEARCH | |
ARCHIVE AREA SEARCH | |
MOTION DETECTION SEARCH |
MOVE:JOG SELECT:SHUTTLE
2
3
Use the jog dial to select MOTION DETECTION SEARCH and
then turn the shuttle dial clockwise. | <SEARCH> |
|
ALARM SEARCH | ||
The MOTION DETECTION SEARCH screen appears. | ALARM THUMBNAIL SEARCH | |
TIME DATE SEARCH | ||
| ARCHIVE AREA SEARCH | |
| MOTION DETECTION SEARCH |
Use the jog dial to select SEARCH FROM and then turn the
shuttle dial clockwise. | <MOTION DETECTION SEARCH> | ||||
SEARCH FROM : ALARM |
| ||||
The ALARM display flashes. | START | : |
| ||
END | : | ||||
| |||||
| CHANNEL | : |
|
| |
| START PREVIEW |
| |||
MOVE:JOG SELECT:SHUTTLE
4
5
Use the jog dial to select the recording area (example: NORMAL), and then turn the shuttle dial clockwise.
The cursor moves to CHANNEL.
Note: If the setting for MULTIPLEXER in the VIDEO INPUT SET menu is set to “NO USE”, the cursor will move to START PREVIEW.
Examples of recording area selection:
•ALARM: Only images in the alarm recording area are searched.
•NORMAL: Only images in the normal recording area are searched.
•ALARM & NORMAL: Images in both the alarm recording area and the normal recording area are searched.
Turn the shuttle dial clockwise, use the jog dial to select the camera number (example: 4), and then turn the shuttle dial clockwise.
The cursor moves to START PREVIEW.
<MOTION DETECTION SEARCH>
SEARCH FROM | : | NORMAL | |
START | : | ||
END | : | ||
|
|
|
|
CHANNEL | : |
| |
START PREVIEW |
| ||
MOVE:JOG SELECT:SHUTTLE
<MOTION DETECTION SEARCH>
SEARCH FROM | : | NORMAL | |
START | : | ||
END | : | ||
CHANNEL | : | 4 |
|
|
|
| |
START PREVIEW |
| ||
MOVE:JOG SELECT:SHUTTLE
30 | English |
