Sanyo Digital Video Recorder, DSR-3000 Recording Conditions SET Setting, See, OFF flashes

RECORDING CONDITIONS SET SETTING

This lets you make settings and set overwriting permissions for each recording area when multiple digital video recorders (up to a maximum of three) are connected for series recording.

Main menu 1 Sub-menus

<MAIN MENU 1>		<RECORDING CONDITIONS	SET>
1.LANGUAGE/CLOCK SET	->	DIGITAL SERIES RECORDING	: OFF
2.VIDEO INPUT SET	->	TOTAL NUMBER	: **
3.RECORDING AREA SET	->	RECORDING NUMBER	: **
4.RECORDING CONDITIONS SET	->
5.NORMAL REC MODE SET	->	NORMAL RECORDING AREA
6.TIMER SET	->	OVERWRITE	: ON
7.HOLIDAY SET	->	ALARM RECORDING AREA
8.ALARM REC MODE SET	->	OVERWRITE	: ON
TO MAIN MENU 2	->
MOVE LINES WITH JOG. SELECT WITH	SHUTTLE	REMAINING DISK WARNING	: **

Sets series recording.

Sets the number of digital video recorders connected.

Sets the number of units connected.

Sets overwriting for the normal recording area.

Sets overwriting for the alarm recording area.

Recording settings for digital series connection (maximum 3 units)

1 Connect the digital video recorders using the digital input and output terminals of each digital video recorder.

(See page 8.)

Note:

•Use a straight-type STP (shielded twisted pair) Ethernet cable to connect the digital video recorders. Each cable should not be any longer than 3 meters.

•If using alarm input, input the same alarm signal to all digital video recorders.

2 Press the MENU button to select RECORDING CONDITIONS SET, and then turn the shuttle dial clockwise.

The RECORDING CONDITIONS SET sub-menu appears, and the cursor moves DIGITAL SERIES RECORDING.

MENU	<RECORDING CONDITIONS	SET>
	DIGITAL SERIES RECORDING	: OFF
	TOTAL NUMBER	: **
	RECORDING NUMBER	: **
	NORMAL RECORDING AREA
	OVERWRITE	: ON
	ALARM RECORDING AREA
	OVERWRITE	: ON
	REMAINING DISK WARNING	: **

3 Turn the shuttle dial clockwise.

“OFF” flashes.

<RECORDING CONDITIONS		SET>
DIGITAL	SERIES RECORDING	:	OFF
TOTAL	NUMBER	:	**
RECORDING NUMBER		: **

Sets the remaining space warning for the recording areas.

4 Use the jog dial to change the setting to “ ON” , and then turn the shuttle dial clockwise.

The cursor moves to TOTAL NUMBER.

<RECORDING CONDITIONS	SET>
DIGITAL SERIES RECORDING	:	ON

TOTAL NUMBER	:	2
RECORDING NUMBER	:	1

5 Turn the shuttle dial clockwise, use the jog dial to set the total number of digital video recorders connected (example: 3), and then turn the shuttle dial clockwise.

The cursor moves to RECORDING NUMBER.

	<RECORDING CONDITIONS		SET>
DIGITAL		SERIES RECORDING	: ON
	TOTAL	NUMBER	:	3
	RECORDING NUMBER		:	1

6 Turn the shuttle dial clockwise, use the jog dial to set the connection number (example: 1), and then turn the shuttle dial clockwise.

The cursor moves to OVERWRITE.

Note:

•The digital video recorder which is used as the main unit should always have its connection number set to 1.

•Do not skip or overlap numbers when making the settings.

•If NETWORK CONTROL in the NETWORK SET menu has been set to “ON”, DIGITAL SERIES RECORDING cannot be selected. Conversely, if DIGITAL SERIES RECORDING has been set to “ON”, NETWORK CONTROL cannot be set to “ON”.

•The VIDEO INPUT SET for VIDEO INPUT of the second and subsequent digital video recorder must be set to DIGITAL.

English 47