Sanyo DSR-3000, Digital Video Recorder Security Lock SET Setting, Set User password

SECURITY LOCK SET SETTING

7 Use the jog dial to change the setting to “ ON” , and then turn the shuttle dial clockwise.

The cursor moves to USER.

	<SECURITY LOCK SET>
LEVEL	PASSWORD(4-8)		USE
ADMIN		123456AB	ON
USER		--------	OFF
REC CONTROL		:	ADMIN

8 Set User password.

Carry out B User password setting. If the User setting is not to be done, this is complete.

Use the jog dial to move the cursor to REC CONTROL and carry out the recording and playback operating privilege setting. (See page 65.)

Note: If setting a 4-character password, leave the 5th character as "-" and then turn the shuttle dial clockwise.

BUser password setting

Example: To set the password to “AB123456”

1 Use the jog dial to move the cursor to USER, and then turn the shuttle dial clockwise.

The first password entry bar flashes.

USER -------- OFF

2 Use the jog dial to display “ A” , and then turn the shuttle dial.

The second password entry bar flashes.

•The characters that can be used in the password are: 0, 1, ...

9, A, B, C, ... Z

USER A------- OFF

3 Use the jog dial to display “ B” , and then turn the shuttle dial.

The third password entry bar flashes.

USER AB------ OFF

4 Repeat this procedure to continue entering “ 123456” , and then turn the shuttle dial clockwise.

The cursor moves to “OFF” and flashes.

	<SECURITY LOCK SET>
LEVEL	PASSWORD(4-8)			USE
ADMIN		123456AB		ON
USER		AB123456		OFF
REC CONTROL		:	ADMIN

5 Use the jog dial to change the setting to “ ON” , and then turn the shuttle dial clockwise.

The cursor moves to REC CONTROL.

Carry out the recording and playback operating privilege setting. (See page 65.)

	<SECURITY LOCK SET>
LEVEL	PASSWORD(4-8)		USE
ADMIN		--------	OFF
USER		AB123456	ON
REC CONTROL		:	ADMIN

64 English