Buzzer SET Setting, Disk Full on, Disk Error on

When the security lock is engaged and a locked button is pressed, the buzzer sounds.

BUZZER SET SETTING

	Main menu 2		Sub-menus
	<MAIN MENU 2>		<BUZZER SET>
	1.DISPLAY/VIDEO LOSS SET	->	ALARM	:	OFF
	2.RS-232C/RS-485 SET	->	DISK FULL	:	ON
	3.BUZZER SET	->	DISK ERROR	:	ON
	4.SECURITY LOCK SET	->	LOCK WARNING	:	ON
	5.NETWORK SET	->	KEY IN	:	OFF
	6.HDD SET	->	NON REC	:	OFF
	7.POWER FAILURE/USED TIME	->
	TO MAIN MENU 1	->
MOVE LINES WITH JOG. SELECT WITH		SHUTTLE

Sets the buzzer to sound when not recording.

The buzzer can be made to sound as a warning during an alarm and when the hard disk becomes full.

1 Press the MENU button twice and display the MAIN MENU 2 screen.

The cursor moves to DISPLAY/VIDEO LOSS SET.

2 Use the jog dial to move the cursor to the BUZZER SET setting, and then turn the shuttle dial clockwise.

The BUZZER SET sub-menu appears, and the cursor moves to

ALARM.

ALARM	:	OFF
DISK FULL	:	ON
DISK ERROR	:	ON
LOCK WARNING	:	ON
KEY IN	:	OFF
NON REC	:	OFF

Sets the buzzer to sound during alarms.

Sets the buzzer to sound when there is no recording space left.

Sets the buzzer to sound when there is a problem with the hard disk.

Sets the buzzer to sound when the security lock is engaged.

Sets the buzzer to sound when an operating button is pressed.

3 Turn the shuttle dial clockwise.

“OFF” flashes. Use the jog dial to change the setting to “ON” or “OFF”.

ON: The buzzer will sound when an alarm is triggered.

4 If necessary, follow the same procedure to change the buzzer setting (ON/OFF).

•DISK FULL (ON):

Sets whether the buzzer sounds when disk overwriting is off and the hard disk is nearly full.

•DISK ERROR (ON):

Sets whether the buzzer sounds when there is a hard disk error.

•LOCK WARNING (ON):

Note: When an item is set to “ON”, the buzzer sounds twice at an interval of about 0.5 seconds.

• KEY IN (ON):

Sets the buzzer to sound each time an operating button is pressed.

• NON REC (ON):

Sets the buzzer to sound when recording stops by itself and when another person deliberately stops recording.

5 Press the EXIT/OSD button.

The display returns to the normal screen.

EXIT/OSD

English

Sanyo DSR-3000 Buzzer SET Setting, Disk Full on, Disk Error on, Lock Warning on, NON REC on

Models: DSR-3000 Digital Video Recorder