ALARM REC MODE SET SETTING
4 Turn the shuttle dial clockwise, use the jog dial to set the recording method (example: “ FRAME” ), and then turn the shuttle dial clockwise.
The cursor moves to AUDIO RECORDING.
| <ALARM REC MODE SET> | |||
PICTURE QUALITY | : | SUPER FINE | ||
FRAME/FIELD RECORDING | : | FRAME | ||
AUDIO | RECORDING | : | OFF |
|
ALARM | RECORDING | : | OFF |
|
REC | CYCLE : 0.20SEC. |
| DURATION: 1SEC | |
: | ¤¤¤ |
| ||
Note:
•When FRAME/FIELD RECORDING is selected, the recording speed appears in REC CYCLE and the maximum number of recordings appears after it in brackets.
=> (30721 ALARMS CAN BE RECORDED)
•The field and frame recording speeds vary depending on the PICTURE QUALITY setting. Refer to the Recording speed table for details. (See page 11.)
5 Turn the shuttle dial clockwise, use the jog dial to set audio recording (example: “ ON” ), and then turn the shuttle dial.
The cursor moves to ALARM RECORDING.
| <ALARM REC MODE SET> | |||
PICTURE QUALITY | : | SUPER FINE | ||
FRAME/FIELD RECORDING : | FRAME | |||
AUDIO | RECORDING | : | ON | |
ALARM | RECORDING | : | OFF |
|
REC | CYCLE : A0.20SEC. DURATION: 1SEC | |||
: | ¤¤¤ |
| ||
REC | CYCLE : ¤¤¤ | SEC. | DURATION: ¤¤¤ | |
Note:
•Audio recording can be set when the REC CYCLE setting is 0.10 SEC (FIELD) or 0.20 SEC (FRAME) or more.
•When set to “ON”, the letter “A” (audio recording indicator) appears in front of the REC CYCLE recording speed, and the maximum number of recordings appears after it in brackets.
=> (25166 ALARMS CAN BE RECORDED)
6 Turn the shuttle dial clockwise, use the jog dial to set alarm recording mode (example: “ MODE1” ), and then turn the shuttle dial.
The cursor moves to REC CYCLE.
Display example: Alarm recording settings
•OFF: Alarm recording is not carried out.
•MODE1: Alarm recording is always carried out regardless of the timer recording settings.
•MODE2: Alarm recording is only carried out when timer recording is in progress.
•MODE3: Alarm recording is only carried out when timer recording is not in progress
•MODE4: Alarm recording is carried out only during the times set by the timer. This cannot be used for normal recording.
Note: If alarm recording is set to a setting such as MODE1,
7 Turn the shuttle dial clockwise, use the jog dial to set the recording speed (example: “ 0.13” ), and then turn the shuttle dial.
DURATION of “1SEC” flashes.
Note: When the recording speed is selected, the maximum number of recordings appears after it in brackets.
=> (17066 ALARMS CAN BE RECORDED)
8 Use the jog dial to set the recording time duration (example: “ 5” ), and then turn the shuttle dial.
The cursor moves to PRE-ALARM RECORDING.
| <ALARM REC MODE SET> | |||
PICTURE QUALITY | : | SUPER FINE | ||
FRAME/FIELD RECORDING | : | FRAME | ||
AUDIO | RECORDING | : | ON | |
ALARM | RECORDING | : | MODE1 | |
REC | CYCLE : A0.13SEC. DURATION: 5SEC | |||
: | OFF |
| ||
REC CYCLE : ¤¤¤ SEC. | DURATION: ¤¤¤ | |||
=> | (03355 ALARMS CAN BE RECORDED) | |||
ALARM | TRIGGER | : | ALARM | |
MOTION SENSOR |
|
| ||
9 Press the EXIT/OSD button.
The display returns to the normal screen.
Alarm settings appear in the operating display section. When an alarm is triggered, the number of alarms is displayed.
EXIT/OSD
Note: If another alarm occurs while alarm recording is in progress, alarm recording continues with images for the second alarm being recorded from the point where the second alarm occurred. If several alarms have occurred at the same time, they are treated as a single alarm until the alarms stop.
English | 55 |
