Sanyo Digital Video Recorder Display SET Setting, Display SET setting, Video Loss SET setting

Note:

• If ALARM RECORDING in the ALARM REC MODE SET menu has been set to “OFF”, ALARM COUNT and ALARM TYPE do not appear. (See page 54.)

• When set to “ON”

DISPLAY SET SETTING

	Main menu 2		Sub-menus
	<MAIN MENU 2>		<DISPLAY SET>
	1.DISPLAY/VIDEO LOSS SET	->	DATE	: ON
	2.RS-232C/RS-485 SET	->	TIME	: ON
	3.BUZZER SET	->	QUALITY	: ON
	4.SECURITY LOCK SET	->	REC CYCLE	: ON
	5.NETWORK SET	->	ALARM COUNT	: ON
	6.HDD SET	->	ALARM TYPE	: ON
	7.POWER FAILURE/USED TIME	->	<VIDEO LOSS	SET>
	TO MAIN MENU 1	->
			VIDEO LOSS	: ON
MOVE LINES WITH JOG. SELECT WITH		SHUTTLE

Displays the date on the monitor screen.

Displays the time on the monitor screen.

Displays the image quality on the monitor screen.

For an example of the display, please refer to the operating display section. (See page 13.)

Displays the alarm types on the monitor screen.

DISPLAY SET setting	6
The date and time that have been set using the CLOCK SET and

other settings can be displayed on the monitor screen during recording and playback. The default setting is for all displays to be “ON”, so all setting items in this menu appear on the screen. You can turn the displays off if required.

1 Press the MENU button twice and display the MAIN MENU 2 screen.

The cursor moves to DISPLAY/VIDEO LOSS SET.

MENU

2 Turn the shuttle dial clockwise.

The DISPLAY SET sub-menu appears, and the cursor moves to DATE.

<DISPLAY SET>		7
DATE	: ON
TIME	: ON
QUALITY	: ON
REC CYCLE	: ON
ALARM COUNT	: ON
ALARM TYPE	: ON
<VIDEO LOSS SET>
VIDEO LOSS	: ON

Displays the recording rate (recording speed) on the monitor screen.

Displays the number of alarms on the monitor screen.

If necessary, follow the same procedure (steps 3 and 4) to change the ON/OFF settings.

•QUALITY (OFF): The picture quality mode does not appear during recording and playback.

•REC CYCLE (OFF): The recording cycle does not appear during recording and playback.

•ALARM COUNT (OFF): The current number of alarms does not appear.

•ALARM TYPE (OFF): The type of alarm recording does not appear.

•ALARM appears in the operating display during alarm recording.

•PRE appears in the operating display during pre-alarm recording.

•ARCHIV appears when playing back images in the archive area.

Press the EXIT/OSD button.

The display returns to the normal screen.

EXIT/OSD

3 Turn the shuttle dial clockwise.

“ON” flashes. If you use the jog dial to change it to “OFF”, the date display disappears from the screen.

4 Turn the shuttle dial clockwise. The cursor moves to TIME.

5 Turn the shuttle dial clockwise.

“ON” flashes. If you use the jog dial to change it to “OFF”, the time display disappears from the screen.

VIDEO LOSS SET setting

Use the jog dial to move the cursor to VIDEO LOSS, and then turn the shuttle dial clockwise.

“ON” flashes. If the camera images are lost when this setting is active, “VIDEO LOSS !” appears on the screen.

English 59