Sanyo DSR-3000, Digital Video Recorder instruction manual Searching for Recorded Images

SEARCHING FOR RECORDED IMAGES

10

2

1

Use the jog dial to move the cursor to PREVIEW, and then turn the shuttle dial clockwise. The screen showing the motion sensor settings appear in the preview screen each time the shuttle dial is turned.

Note: If no motion sensor settings have been made, “NOT FOUND” appears, so make sure that the motion sensor settings have been made correctly.

<MOTION DETECTION SEARCH>

SEARCH FROM : NORMAL / CHANNEL : 4

START :

10-28-01 10:00 END :

10-28-01 20:00

MOTION SENSOR ->

PREVIEW ->

VIEW ->

MOVE:JOG SELECT:SHUTTLE

11

2

1

To view a motion sensor setting in a single-screen display, use the jog dial to move the cursor to VIEW and then turn the shuttle dial clockwise.

The display changes from the specified image to normal playback.

Note: When using a multiplexer and the camera number has been specified as a channel when carrying out motion detector searches, only images for the specified camera number will be played back. For playback of all cameras the playback has first to be switched off and then switched on again. Furthermore, the multiplexer title information and date information may not be fully displayed at this time in some cases.

32 English