Carrier Access none manual Mail-server authentication enable, Mail-server from-address

Global Configuration Mode

Global Configuration Commands

mail-server

mail-server authentication enable

Use the mail-server authentication enable command to enable the outgoing mail server authentication. To disable the mail-server authentication, see no mail-server authentication command on page 4-44.

Syntax: (config)# mail-server authentication enable

Example: (config)# mail-server authentication enable

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

mail-server from-address

Use the mail-serverfrom-addresscommand to set the outgoing mail server from an e-mail address.

Syntax: (config)# mail-server from-address address

Field	Definition
address	Enter the "from e-mail" address.

Example: (config)# mail-server from-address xxx@turinnetworks.com

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

mail-server host

Use the mail-server host command to set the outgoing mail server.

Syntax: (config)# mail-server host address

Field	Definition
address	Outgoing mail server IP address.

Example: (config)# mail-server host 192.168.1.1

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-33