Carrier Access none manual No destination-pattern, Syntax config-dpeer-trk# no codec preference

Configuration - Dial Peer Trunk Mode

no commands

no codec preference

Use the Dial Peer no codec preference command to remove a codec preference. To set the preferences, see codec preference command on page 9-2.

Syntax: (config-dpeer-trk)# no codec preference {123}

Field

123

Definition

Set the preference level. Range 1 - 3.

Example: (config-dpeer-trk)# no codec preference 1

Supported Platforms: Adit 3500, MSR

no destination-pattern

Use the Dial Peer no destination-patterncommand to remove a destination pattern. To set the destination pattern, see destination-patterncommand on page 9-2.

Syntax: (config-dpeer-trk)# no destination-pattern

Example: (config-dpeer-trk)# no destination-pattern

Supported Platforms: Adit 3500, MSR

no sip-authentication

Use the Dial Peer no sip-authenticationcommand to disable SIP authentication. To configure SIP authentication, see sip-authenticationcommand on page 9-7.

Syntax: (config-dpeer-trk)# no sip-authentication

Example: (config-dpeer-trk)# no sip-authentication

Supported Platforms: Adit 3500, MSR

9-6 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI