Carrier Access none manual No ipsec vpnipsec, No interface multilink, No interface serial

Global Configuration Mode

Global Configuration Commands

no ipsec vpn_ipsec

Use the no ipsec vpn_ipsec command to delete an IPSec connection.

To create an IPSec connection, see ipsec net-to-hostcommand on page 4-23or ipsec net-to-netcommand on page 4-24

To enter an IPSec connection, for configuration see ipsec vpn_ipsec command on page 4-24.

Syntax: (config)# no ipsec ipsec connection-id

Field	Definition
connection-id	Enter the name of a connection.

Example: (config)# no ipsec ipsec 1

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

no interface multilink

Use the no interface multilink command denies access to the MLPPP configuration commands. To enter the Multilink interface configuration mode, see the interface multilink command on page 4-20.

Syntax: (config)# no interface multilink group-number

Field	Definition
group-number	Enter multilink group number.
	Adit 3104, Adit 3200, Adit 3500: Value must be 1.
	MSR: Range = 1-8.

Example: (config)# no interface multilink 1

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

no interface serial

Use the no interface serial command denies access to the serial interface configuration commands. To enter the serial interface configuration mode, see interface serial command on page 4-20.

Syntax: (config)# no interface serial port

Field

port

Definition

Adit 3104: Value must be 1.

Adit 3200, Adit 3500: Range = 1-4.

MSR: Range = 1-8.

Example: (config)# no interface serial 1

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

4-42 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI