Carrier Access none No idle-time, Example config-pptps# no ppp authentication, 40-bit, Stateful

Configuration - PPTPS Mode

no commands

no idle-time

Use the PPTP Server no idle-timecommand to reset the idle time to the default setting. To set the maximum idle time for a PPTP connection, see idle-timecommand on page 18-4.

Syntax: (config-pptps)# no idle-time

Example: (config-pptps)# no idle-time

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

no ppp authentication

Use the PPTP Server no ppp authentication command to disable PPP authentication. To enable PPP authentication, see ppp authentication command on page 18-6.

Syntax: (config-pptps)# no ppp authentication {chapms-chap ms-chapv2pap}

Field	Definition
chap	Support Challenge Handshake Authentication (CHAP)
ms-chap	Support Microsoft CHAP (MS-CHAP).
ms-chapv2	Support Microsoft CHAP Version 2 (MS-CHAPv2).
pap	Support an unencrypted password. Default.

Example: (config-pptps)# no ppp authentication

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

no ppp encryption

Use the PPTP Server no ppp encryption command to disable PPP encryption. To enable PPP encryption, see ppp encryption command on page 18-6.

Syntax: (config-pptps)# no ppp encryption {40-bit128-bitstateful}

Field	Definition
40-bit	MPPE-40 - Microsoft PPP encryption algorithm.
128-bit	MPPE-128 - Microsoft PPP encryption algorithm.
stateful	Enable the stateful state for encryption.

Example: (config-pptps)# no ppp encryption

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 18-5