Carrier Access none manual Ping, Syntax ping address -i time -l size -n count -w timeoutstop, Stop

User Mode

ping

Use the ping command to send a sequence of ICMP echo request packets to the specified host. If the host variable is omitted, and you are in User mode, the router prompts you for additional information. Note: The ping command verifies a connection, and is a very important troubleshooting tool.

Syntax: > ping {address [-i time] [-l size] [-n count] [-w timeout]stop}

Field		Definition
address		IP address of the host to ping.
-i	time	Specifies the intervals between pings.
		Range is 0 - 600000 milliseconds.
-l	size	Specifies the size of the ping requests packets to be sent. Range 64 -
		1518.
-n	count	Specifies the number of ping requests to be sent.
		Range 1-1000. Default is 4.
-wtimeout		Specifies the time to wait for a response before sending the next ping
		request packet. Timeout is given in seconds. Range 1-600000. Default
		is 2 seconds.
stop		Stop the ping process.

Example: Adit 3500> ping 192.168.1.1

packet #1 has arrived packet #2 has arrived packet #3 has arrived packet #4 has arrived

4 packets transmitted, 4 packets received round-trip min/avg/max = 1/3/9 ms

Example: Adit 3500> ping 192.168.1.1 -n 2 -l 500

packet #1 has arrived packet #2 has arrived

2 packets transmitted, 2 packets received round-trip min/avg/max = 2/2/2 ms

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 2-5