SMC Networks SMC8624/48T manual Dot1x timeout re-authperiod, Dot1x timeout tx-period

COMMAND LINE INTERFACE

Command Mode

Global Configuration

Example

Console(config)#dot1x timeout quiet-period 350

Console(config)#

dot1x timeout re-authperiod

This command sets the time period after which a connected client must be re-authenticated.

Syntax

dot1x timeout re-authperiod seconds no dot1x timeout re-authperiod

seconds - The number of seconds. (Range: 1-65535)

Default

3600 seconds

Command Mode

Global Configuration

Example

Console(config)#dot1x timeout re-authperiod 300

Console(config)#

dot1x timeout tx-period

This command sets the time that the switch waits during an authentication session before re-transmitting an EAP packet. Use the no form to reset to the default value.

Syntax

dot1x timeout tx-period seconds no dot1x timeout tx-period

seconds - The number of seconds. (Range: 1-65535)

4-110