SMC Networks SMC8624/48T Syntax Line console vty, Default Setting, Command Mode, Example

LINE COMMANDS

Table 4-5. Line Command Syntax

Command	Function	Mode	Page
stopbits*	Sets the number of the stop bits transmitted per	LC	4-24
	byte
disconnect	Terminates a line connection	PE	4-24
show line	Displays a terminal line's parameters	NE,	4-25
		PE

* These commands only apply to the serial port.

line

This command identifies a specific line for configuration, and to process subsequent line configuration commands.

Syntax

line {console vty}

•console - Console terminal line.

•vty - Virtual terminal for remote console access (i.e., Telnet).

Default Setting

There is no default line.

Command Mode

Global Configuration

Command Usage

Telnet is considered a virtual terminal connection and will be shown as “Vty” in screen displays such as show users. However, the serial communication parameters (e.g., databits) do not affect Telnet connections.

Example

To enter console line mode, enter the following command:

Console(config)#line console

Console(config-line)#

4-15