SMC Networks SMC8624/48T manual Configuring Static DNS Host to Address Entries, 193

CONFIGURING DOMAIN NAME SERVICE

CLI - This example sets a default domain name and a domain list. However, remember that if a domain list is specified, the default domain name is not used.

Console(config)#ip domain-name sample.com	3-187
Console(config)#ip domain-list sample.com.uk	3-188
Console(config)#ip domain-list sample.com.jp
Console(config)#ip name-server 192.168.1.55 10.1.0.55	3-190
Console(config)#ip domain-lookup	3-191
Console#show dns	3-193

Domain Lookup Status: DNS enabled

Default Domain Name:

.sample.com Domain Name List:

.sample.com.uk

.sample.com.jp Name Server List:

192.168.1.55

10.1.0.55

Console#

Configuring Static DNS Host to Address Entries

You can manually configure static entries in the DNS table that are used to map domain names to IP addresses.

Command Usage

•Static entries may be used for local devices connected directly to the attached network, or for commonly used resources located elsewhere on the network.

•Servers or other network devices may support one or more connections via multiple IP addresses. If more than one IP address is associated with a host name in the static table or via information returned from a name server, a DNS client can try each address in succession, until it establishes a connection with the target device.

3-193