SMC Networks SMC8624/48T manual Displaying Current VLANs, 147, Command Attributes Web

VLAN CONFIGURATION

Web – Click VLAN, 802.1Q VLAN, Basic Information.

Figure 3-60. Displaying Basic VLAN Information

CLI – Enter the following command.

Console#show bridge-ext 3-251

Max support vlan numbers: 255

Max support vlan ID: 4094

Extended multicast filtering services: No

Static entry individual port: Yes

VLAN learning: IVL

Configurable PVID tagging: Yes

Local VLAN capable: Yes

Traffic classes: Enabled

Global GVRP status: Disabled

GMRP: Disabled

Console#

Displaying Current VLANs

The VLAN Current Table shows the current port members of each VLAN and whether or not the port supports VLAN tagging. Ports assigned to a large VLAN group that crosses several switches should use VLAN tagging. However, if you just want to create a small port-based VLAN for one or two switches, you can disable tagging.

Command Attributes (Web)

•VLAN ID – ID of configured VLAN (1-4094).

•Up Time at Creation – Time this VLAN was created (i.e., System Up Time).

•Status – Shows how this VLAN was added to the switch.

-Dynamic GVRP: Automatically learned via GVRP.

-Permanent: Added as a static entry.

•Egress Ports – Shows all the VLAN port members.

•Untagged Ports – Shows the untagged VLAN port members.

3-147