SMC Networks SMC8624/48T manual DNS Commands

DNS COMMANDS

DNS Commands

These commands are used to configure Domain Naming System (DNS) services. You can manually configure entries in the DNS domain name to IP address mapping table, configure default domain names, or specify one or more name servers to use for domain name to address translation.

Note that domain name services will not be enabled until at least one name server is specified with the ip name-servercommand and domain lookup is enabled with the ip domain-lookupcommand

Table 4-31. DNS Commands

Command	Function	Mode	Page
ip host	Creates a static host name-to-address	GC	4-158
	mapping
clear host	Deletes entries from the host	PE	4-159
	name-to-address table
ip domain-name	Defines a default domain name for	GC	4-159
	incomplete host names
ip domain-list	Defines a list of default domain names for	GC	4-160
	incomplete host names
ip name-server	Specifies the address of one or more name	GC	4-162
	servers to use for host name-to-address
	translation
ip domain-lookup	Enables DNS-based host name-to-address	GC	4-163
	translation
show hosts	Displays the static host name-to-address	PE	4-164
	mapping table
show dns	Displays the configuration for DNS services	PE	4-165
show dns cache	Displays entries in the DNS cache	PE	4-165
clear dns cache	Clears all entries from the DNS cache	PE	4-166

4-157