SMC Networks SMC8624/48T manual Command Line Processing, Keystroke Function

ENTERING COMMANDS

Table 4-2. Configuration Commands

Mode	Command	Prompt	Page
VLAN	vlan database	Console(config-vlan)	4-231
MSTP	spanning-tree	Console(config-mstp)#	4-213
	mst-configuration

For example, you can use the following commands to enter interface configuration mode, and then return to Privileged Exec mode.

Console(config)#interface ethernet 1/5

.

.

.

Console(config-if)#exit Console(config)#

Command Line Processing

Commands are not case sensitive. You can abbreviate commands and parameters as long as they contain enough letters to differentiate them from any other currently available commands or parameters. You can use the Tab key to complete partial commands, or enter a partial command followed by the “?” character to display a list of possible matches. You can also use the following editing keystrokes for command-line processing:

	Table 4-3.Keystroke Commands
Keystroke		Function
Ctrl-A		Shifts cursor to start of command line.
Ctrl-B		Shifts cursor to the left one character.
Ctrl-C		Terminates the current task and displays the
		command prompt.
Ctrl-E		Shifts cursor to end of command line.
Ctrl-F		Shifts cursor to the right one character.
Ctrl-K		Deletes all characters from the cursor to the end of
		the line.
Ctrl-L		Repeats current command line on a new line.
Ctrl-P		Enters the last command.

4-11