SMC Networks SMC8624/48T manual Priority Commands, 255, Garp timer 4

COMMAND LINE INTERFACE

Example

Console#show garp timer ethernet 1/1

Eth 1/ 1 GARP timer status:

Join timer: 20 centiseconds

Leave timer: 60 centiseconds

Leaveall timer: 1000 centiseconds

Console#

Related Commands

garp timer (4 -253)

Priority Commands

The commands described in this section allow you to specify which data packets have greater precedence when traffic is buffered in the switch due to congestion. This switch supports CoS with eight priority queues for each port. Data packets in a port’s high-priority queue will be transmitted before those in the lower-priority queues. You can set the default priority for each interface, the relative weight of each queue, and the mapping of frame priority tags to the switch’s priority queues.

Table 4-45. Priority Commands

Command Groups	Function	Page
Priority (Layer 2)	Configures default priority for untagged frames,	4-256
	sets queue weights, and maps class of service tags
	to hardware queues
Priority (Layer 3 and 4)	Maps TCP ports, IP precedence tags, or IP	4-263
	DSCP tags to class of service values

4-255