SMC Networks SMC8624/48T manual Specifying Trap Managers and Trap Types

CONFIGURING THE SWITCH

Command Attributes

•Trap Manager Capability – This switch supports up to five trap managers.

•Trap Manager IP Address – Internet address of the host (the targeted recipient).

•Trap Manager Community String – Community string sent with the notification operation. (Range: 1-32 characters, case sensitive)

•Trap Version – Specifies whether to send notifications as SNMP v1 or v2c traps. (The default is version 1.)

•Enable Authentication Traps – Issues a trap message whenever an invalid community string is submitted during the SNMP access authentication process. (The default is enabled.)

•Enable Link-up and Link-down Traps – Issues link-up or link-down traps. (The default is enabled.)

Web – Click SNMP, Configuration. Fill in the IP address and community string for each trap manager that will receive these messages, specify the SNMP version, mark the trap types required, and then click Add.

Figure 3-16. Specifying Trap Managers and Trap Types

CLI – This example adds a trap manager and enables both authentication and link-up, link-down traps.

Console(config)#snmp-server host 192.168.1.19 private version 2c3-152

Console(config)#snmp-server enable traps 3-154

3-32