SMC Networks SMC8624/48T manual Time Commands

COMMAND LINE INTERFACE

Example

Console#show logging sendmail SMTP servers

-----------------------------------------------

192.168.1.19

SMTP minimum severity level: 7

SMTP destination email addresses

-----------------------------------------------

ted@this-company.com

SMTP source email address: bill@this-company.com

SMTP status: Enable

Console#

Time Commands

The system clock can be dynamically set by polling a set of specified time servers (NTP or SNTP), or by using information broadcast by local time servers.

Table 4-16. Time Commands

Command	Function	Mode	Page
sntp server	Specifies one or more time servers	GC	4-71
sntp poll	Sets the interval at which the client polls for	GC	4-72
	time
sntp client	Accepts time from specified time servers	GC	4-72
sntp broadcast	Accepts time from any time broadcast server	GC	4-74
client
show sntp	Shows current SNTP configuration settings	NE,	4-74
		PE
clock timezone	Sets the time zone for the switch’s internal	GC	4-75
	clock
calendar set	Sets the system date and time	PE	4-76
show calendar	Displays the current date and time setting	NE,	4-76
		PE

4-70