SMC Networks SMC8624/48T manual Setting the Time Zone

BASIC CONFIGURATION

Setting the Time Zone

SNTP uses Coordinated Universal Time (or UTC, formerly Greenwich Mean Time, or GMT) based on the time at the Earth’s prime meridian, zero degrees longitude. To display a time corresponding to your local time, you must indicate the number of hours and minutes your time zone is east (before) or west (after) of UTC.

Command Attributes

•Current Time – Displays the current time.

•Name – Assigns a name to the time zone.

•Hours (0-12)– The number of hours before/after UTC.

•Minutes (0-59)– The number of minutes before/after UTC.

•Direction – Configures the time zone to be before (east) or after (west) UTC.

Web – Select SNTP, Clock Time Zone. Set the offset for your time zone relative to the UTC, and click Apply.

Figure 3-14. Setting the Time Zone

CLI - This example shows how to set the time zone for the system clock.

Console(config)#clock timezone Dhaka hours 6 minute 0 after-UTC	3-75
Console#

3-29