SMC Networks SMC8624/48T Setting the Switch’s IP Address, Web Click System, Bridge Extension

BASIC CONFIGURATION

Web – Click System, Bridge Extension.

Figure 3-5. Bridge Extension Configuration

CLI – Enter the following command.

Console#show bridge-ext 3-251

Max support vlan numbers: 255

Max support vlan ID: 4094

Extended multicast filtering services: No

Static entry individual port: Yes

VLAN learning: IVL

Configurable PVID tagging: Yes

Local VLAN capable: Yes

Traffic classes: Enabled

Global GVRP status: Disabled

GMRP: Disabled

Console#

Setting the Switch’s IP Address

This section describes how to configure an IP interface for management access over the network. The IP address for this switch is unassigned by default. To manually configure an address, you need to change the switch’s default settings (IP address 0.0.0.0 and netmask 255.0.0.0) to values that are compatible with your network. You may also need to a establish a default gateway between the switch and management stations that exist on another network segment.

3-17