SMC Networks SMC8624/48T manual 225, Spanning-tree mst port-priority 4

COMMAND LINE INTERFACE

Default Setting

•Ethernet – half duplex: 2,000,000; full duplex: 1,000,000; trunk: 500,000

•Fast Ethernet – half duplex: 200,000; full duplex: 100,000; trunk: 50,000

•Gigabit Ethernet – full duplex: 10,000; trunk: 5,000

Command Mode

Interface Configuration (Ethernet, Port Channel)

Command Usage

•Each spanning-tree instance is associated with a unique set of VLAN IDs.

•This command is used by the multiple spanning-tree algorithm to determine the best path between devices. Therefore, lower values should be assigned to interfaces attached to faster media, and higher values assigned to interfaces with slower media.

•Path cost takes precedence over interface priority.

Example

Console(config)#interface ethernet ethernet 1/5

Console(config-if)#spanning-tree mst 1 cost 50

Console(config-if)#

Related Commands

spanning-tree mst port-priority (4 -226)

4-225