COMMAND LINE INTERFACE

Default Setting

Default system mask: Filter inbound packets according to specified IP ACLs.

Command Mode

Global Configuration

Command Usage

A mask can only be used by all ingress ACLs or all egress ACLs.

The precedence of the ACL rules applied to a packet is not determined by order of the rules, but instead by the order of the masks; i.e., the first mask that matches a rule will determine the rule that is applied to a packet.

You must configure a mask for an ACL rule before you can bind it to a port or set the queue or frame priorities associated with the rule.

Example

Console(config)#access-list ip mask-precedence in

Console(config-ip-mask-acl)#

Related Commands

mask (IP ACL) (4-125) ip access-group(4-129)

4-124

Page 368
Image 368
SMC Networks SMC8624/48T manual Default Setting, Mask IP ACL 4-125 ip access-group4-129