SMC Networks SMC8624/48T manual 254, Show garp timer 4, Syntax Show garp timer interface

GVRP AND BRIDGE EXTENSION COMMANDS

•Timer values are applied to GVRP for all the ports on all VLANs.

•Timer values must meet the following restrictions:

-leave >= (2 x join)

-leaveall > leave

Note: Set GVRP timers on all Layer 2 devices connected in the same network to the same values. Otherwise, GVRP may not operate successfully.

Example

Console(config)#interface ethernet 1/1

Console(config-if)#garp timer join 100

Console(config-if)#

Related Commands

show garp timer (4 -254)

show garp timer

This command shows the GARP timers for the selected interface.

Syntax

show garp timer [interface]

interface

•ethernet unit/port

-unit - This is device 1.

-port - Port number.

•port-channel channel-id(Range: 1-6)

Default Setting

Shows all GARP timers.

Command Mode

Normal Exec, Privileged Exec

4-254