SMC Networks SMC8624/48T Statically Configuring a Trunk Command Usage, Static Trunk Configuration

CONFIGURING THE SWITCH

Statically Configuring a Trunk

Command Usage

•When configuring static trunks, you may not be able to link switches of different types, depending on the manufacturer’s implementation. However, note that the static trunks on this switch are Cisco EtherChannel compatible.

active links

statically configured

}

•To avoid creating a loop in the

network, be sure you add a static trunk via the configuration interface

before connecting the ports, and also disconnect the ports before removing a static trunk via the configuration interface.

Web – Click Port, Trunk Membership. Enter a trunk ID of 1-6 in the Trunk field, select any of the switch ports from the scroll-down port list, and click Add. After you have completed adding ports to the member list, click Apply.

Figure 3-38. Static Trunk Configuration

3-88