SMC Networks SMC8624/48T Dot1x port-control, Default, Force-authorized, Interface Configuration

AUTHENTICATION COMMANDS

dot1x port-control

This command sets the dot1x mode on a port interface. Use the no form to restore the default.

Syntax

dot1x port-control {auto force-authorized force-unauthorized}no dot1x port-control

•auto – Requires a dot1x-aware connected client to be authorized by the RADIUS server. Clients that are not dot1x-aware will be denied access.

•force-authorized– Configures the port to grant access to all clients, either dot1x-aware or otherwise.

•force-unauthorized– Configures the port to deny access to all clients, either dot1x-aware or otherwise.

Default

force-authorized

Command Mode

Interface Configuration

Example

Console(config)#interface eth 1/2

Console(config-if)#dot1x port-control auto

Console(config-if)#

4-107