SMC Networks SMC8624/48T manual Gvrp and Bridge Extension Commands, 250, Bridge-ext gvrp

GVRP AND BRIDGE EXTENSION COMMANDS

GVRP and Bridge Extension Commands

GARP VLAN Registration Protocol defines a way for switches to exchange VLAN information in order to automatically register VLAN members on interfaces across the network. This section describes how to enable GVRP for individual interfaces and globally for the switch, as well as how to display default configuration settings for the Bridge Extension MIB.

Table 4-44. GVRP and Bridge Extension Commands

Command	Function	Mode	Page
bridge-ext gvrp	Enables GVRP globally for the	GC	4-250
	switch
show bridge-ext	Shows the global bridge extension	PE	4-251
	configuration
switchport gvrp	Enables GVRP for an interface	IC	4-252
switchport forbidden vlan	Configures forbidden VLANs for	IC	4-241
	an interface
show gvrp configuration	Displays GVRP configuration for	NE,	4-252
	the selected interface	PE
garp timer	Sets the GARP timer for the	IC	4-253
	selected function
show garp timer	Shows the GARP timer for the	NE,	4-254
	selected function	PE

bridge-ext gvrp

This command enables GVRP globally for the switch. Use the no form to disable it.

Syntax

[no] bridge-ext gvrp

Default Setting

Disabled

4-250