SMC Networks SMC8624/48T manual 184, Configuring Internet Group Management Protocol

CONFIGURING THE SWITCH

•IGMP Version — Sets the protocol version for compatibility with other devices on the network. (Range: 1-2; Default: 2)

Notes: 1. All systems on the subnet must support the same version.

2.Some attributes are only enabled for IGMPv2, including IGMP Report Delay and IGMP Query Timeout.

Web – Click IGMP Snooping, IGMP Configuration. Adjust the IGMP settings as required, and then click Apply.

(The default settings are shown below.)

Figure 3-80. Configuring Internet Group Management Protocol

CLI – This example modifies the settings for multicast filtering, and then displays the current status.

Console(config)#ip igmp snooping			3-273
Console(config)#ip igmp snooping querier			3-278
Console(config)#ip igmp snooping query-count 10			3-278
Console(config)#ip igmp snooping query-interval 100			3-279
Console(config)#ip igmp snooping query-max-response-time 20			3-280
Console(config)#ip igmp snooping query-time-out 300			3-281
Console(config)#ip igmp snooping version 2			3-275
Console(config)#exit
Console#show ip igmp snooping			3-276
Service status	: Enabled
Querier status	: Enabled
Query count	: 10
Query interval	: 100 sec
Query max response time : 20		sec
Router port expire time: 300		sec
IGMP snooping version	: Version 2
Console#

3-184