SMC Networks SMC8624/48T manual 105, Command Attribute

PORT CONFIGURATION

Command Attribute

Rate Limit – Sets the output rate limit for an interface.

Default Status – Disabled

Default Rate – 1000 Mbps

Range – 1 - 1000 Mbps

Web - Click Rate Limit, Input/Output Port/Trunk Configuration. Set the Input Rate Limit Status or Output Rate Limit Status, then set the rate limit for the individual interfaces, and click Apply.

Figure 3-46. Configuring Output Port Rate Limiting

CLI - This example sets the rate limit for input and output traffic passing through port 1 to 600 Mbps.

Console(config)#interface ethernet 1/1	3-168
Console(config-if)#rate-limit input 600	3-186
Console(config-if)#rate-limit output 600
Console(config-if)#

3-105